Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 33 guides that include this step.

Английский
Итальянский

Translating step 1

Шаг 1
Remove the two 11.3 mm T6 Torx screws securing the fan to the logic board near the antenna plate.
  • Remove the two 11.3 mm T6 Torx screws securing the fan to the logic board near the antenna plate.

Rimuovere le due viti Torx T6 da 11,3 mm che fissano la ventola alla scheda logica, in prossimità della piastra dell'antenna.

Ваш вклад лицензируется под свободной лицензией Creative Commons.