Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 20 guides that include this step.

Английский
Итальянский
Шаг 3
Remove the following three screws:
  • Remove the following three screws:

  • One 5.0 mm T8 Torx or 2.0 mm Hex screw (either screwdriver will work)

  • One 16.2 mm T6 Torx screw

  • One 26 mm T6 Torx standoff

Rimuovere le tre viti seguenti:

Una vite Torx T8 da 5 mm o vite esagonale da 2 mm (vanno bene entrambi i cacciaviti)

Una vite Torx T6 da 16,2 mm

Un distanziatore Torx T6 da 26 mm

Ваш вклад лицензируется под свободной лицензией Creative Commons.