Перейти к основному содержанию

Отремонтируйте ваше устройство

Обучение ремонту

Запчасти и инструменты

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 21 руководства, которые включают этот шаг.

Английский
Немецкий
Шаг 3
While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad. Don't insert the opening pick any deeper than 2 mm into the side of the display. Inserting the pick deeper than 2 mm could damage the backlight assembly, LCD display, or touchscreen.
  • While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.

  • Don't insert the opening pick any deeper than 2 mm into the side of the display. Inserting the pick deeper than 2 mm could damage the backlight assembly, LCD display, or touchscreen.

Während du das Display mit dem Saugnapf anhebst, führe ein Opening Pick in die Lücke zwischen dem Glas und dem iPad Gehäuse ein.

Füge das Opening Pick nur soweit ein, wie der Schwarze Rand am Display breit ist. Falls du das Pick zu weit einführst, kannst du das LCD beschädigen.

[* black] While holding the glass up with the suction cup, slide the point of an opening pick into the gap between the glass and body of the iPad.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on2 mm into the side of the display. Inserting the pick too far maydeeper than 2 mm could damage the LCDbacklight assembly, LCD display, or touchscreen.
[* icon_caution] Don't insert the opening pick any deeper than the black bezel on2 mm into the side of the display. Inserting the pick too far maydeeper than 2 mm could damage the LCDbacklight assembly, LCD display, or touchscreen.

Ваш вклад лицензируется под свободной лицензией Creative Commons.