Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 21 guides that include this step.

Английский
Испанский
Step 3
When disconnecting any press connectors from the logic board, be sure to lift the connector straight up to avoid ripping the socket off the board. Use the flat tip of a spudger to disconnect the battery connector from its socket on the logic board.
  • When disconnecting any press connectors from the logic board, be sure to lift the connector straight up to avoid ripping the socket off the board.

  • Use the flat tip of a spudger to disconnect the battery connector from its socket on the logic board.

  • Bend the battery connector ribbon cable up slightly to prevent it from making contact and powering on the iPad.

Вставьте перевод здесь

Вставьте перевод здесь

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.