Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect the guide that includes this step.

Английский
Итальянский
Шаг 2
While working from the inner side of the bracket, push the grommet through the hole in the side of the bracket. Be sure the grommet is seated nicely in the bracket as seen in the third picture. Repeat the process for the remaining three grommets on either sides of the brackets.
  • While working from the inner side of the bracket, push the grommet through the hole in the side of the bracket.

  • Be sure the grommet is seated nicely in the bracket as seen in the third picture.

  • Repeat the process for the remaining three grommets on either sides of the brackets.

Durante le operazioni sulla parte interna della staffa, premere l'anello di tenuta nel foro nel lato della staffa.

Verificare che l'anello di tenuta sia posizionato correttamente nella staffa, come indicato nella terza immagine.

Ripetere la procedura per gli altri tre anelli di tenuta su entrambi i lati delle staffe.

Ваш вклад лицензируется под свободной лицензией Creative Commons.