Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 15 guides that include this step.

Английский
Немецкий

Translating step 1

Step 1
Remove the following four tri-point Y000 screws securing the lower display cable bracket to the logic board:
  • Remove the following four tri-point Y000 screws securing the lower display cable bracket to the logic board:

  • Three 1.2 mm screws

  • One 2.6 mm screw

Entferne die folgenden Dreipunkt Y000-Schrauben, die die Blende des unteren Displaykabels am Logic Board fixieren:

Drei 1,2mm Schrauben

Eine 2,6mm Schraube

Ваш вклад лицензируется под свободной лицензией Creative Commons.