Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 20 guides that include this step.

Английский
Французский
Step 5
The connectors at the ends of the following cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.
  • The connectors at the ends of the following cables are attached very firmly to the sockets on the logic board. Pulling directly on the cable will either separate the cable from its connector or the socket from the logic board.

  • Use the sharp end of a spudger to disconnect the speaker cable connector.

Вставьте перевод здесь

Вставьте перевод здесь

Ваш вклад лицензируется под свободной лицензией Creative Commons.