Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 14 guides that include this step.

Английский
Японский
Step 3
Use the edge of a plastic opening tool to pry the cable cover tabs out of their slots cut into the EMI shield on the logic board. Lift the cable cover from its edge nearest the top and remove it from the iPhone.
  • Use the edge of a plastic opening tool to pry the cable cover tabs out of their slots cut into the EMI shield on the logic board.

  • Lift the cable cover from its edge nearest the top and remove it from the iPhone.

プラスチック製開封ツールの先端を使って、ロジックボード上のEMIシールドに入っている溝に差し込み、ケーブルカバータブをこじ開けます。

一番上部に近いケーブルカバー上部の端から持ち上げて、iPhoneから取り外します。

Ваш вклад лицензируется под свободной лицензией Creative Commons.