Перейти к основному содержанию
Английский
Немецкий
Шаг 13
Remove all screws from the logic board cover.  Two are recessed in the middle; others are along the edge. More will become visible as other parts are removed. It's like a game! You can start with the screws holding in the black plastic pieces, but I started with the most visible and went from there. There are two wires (shown in the third picture) coming from the logic board and connected to the Wi-Fi antennas. These are delicate. Do not break them. There are two wires (shown in the third picture) coming from the logic board and connected to the Wi-Fi antennas. These are delicate. Do not break them.
  • Remove all screws from the logic board cover. Two are recessed in the middle; others are along the edge. More will become visible as other parts are removed. It's like a game! You can start with the screws holding in the black plastic pieces, but I started with the most visible and went from there.

  • There are two wires (shown in the third picture) coming from the logic board and connected to the Wi-Fi antennas. These are delicate. Do not break them.

Entferne alle Schrauben der Hauptplatinenabdeckung. Zwei sind in der Mitte versenkt, andere befinden sich entlang des Randes. Weitere werden sichtbar, wenn andere Teile entfernt werden. Du kannst mit den Schrauben beginnen, die die schwarzen Plastikteile halten, aber ich habe mit den sichtbarsten angefangen und bin von dort aus weitergegangen.

Es gibt zwei Drähte (im dritten Bild zu sehen), die von der Hauptplatine kommen und mit den Wi-Fi-Antennen verbunden sind. Diese sind empfindlich. Beschädige sie nicht.

Ваш вклад лицензируется под свободной лицензией Creative Commons.