Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 17 guides that include this step.

Английский
Испанский

Translating step 1

Шаг 1
Using the tip of a spudger, peel back the piece of tape that secures the touchscreen ribbon cable to the logic board.
  • Using the tip of a spudger, peel back the piece of tape that secures the touchscreen ribbon cable to the logic board.

Con la punta de un spudger, despegue la pieza de cinta que fija el cable plano de la pantalla táctil a la placa lógica.

Ваш вклад лицензируется под свободной лицензией Creative Commons.