Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 6 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 6
With the adhesive cut, slowly lift the display up from the top (the side with the speaker-grille cutout), carefully flip it over vertically toward the bottom of the device, and rest it on its face, as shown. Don't forget there's sticky adhesive everywhere, so consider resting an opening pick between the screen and display, to avoid spreading the gunk! Do not attempt to completely remove the display yet, as it is still connected by a fragile ribbon cable. Be careful to not to strain the cable while positioning the display.
  • With the adhesive cut, slowly lift the display up from the top (the side with the speaker-grille cutout), carefully flip it over vertically toward the bottom of the device, and rest it on its face, as shown.

  • Don't forget there's sticky adhesive everywhere, so consider resting an opening pick between the screen and display, to avoid spreading the gunk!

  • Do not attempt to completely remove the display yet, as it is still connected by a fragile ribbon cable. Be careful to not to strain the cable while positioning the display.

Una volta tagliato l'adesivo, solleva lentamente il display dalla parte superiore (quella con la griglia per gli altoparlanti), ruotalo delicatamente oltre la verticale e disponilo, come mostrato, con la superficie frontale posata sulla parte inferiore del dispositivo.

Non dimenticare che c'è adesivo appiccicoso ovunque, quindi considera di lasciare un plettro di apertura tra lo schermo e il display, per evitare di spargere la sporcizia!

Non cercare di rimuovere completamente il display, è ancora collegato con un fragile cavo sottile. Fai attenzione a non forzare il cavo mentre muovi il display.

Ваш вклад лицензируется под свободной лицензией Creative Commons.