Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 34 guides that include this step.

Английский
Китайский

Translating step 1

Step 1
The glass panel is fixed onto the front bezel with fourteen magnets around its perimeter. Stick two suction cups to opposing corners of the glass panel.
  • The glass panel is fixed onto the front bezel with fourteen magnets around its perimeter.

  • Stick two suction cups to opposing corners of the glass panel.

  • To attach the suction cups we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.

  • If your suction cups refuse to stick, try cleaning both the glass panel and the suction cup with a mild solvent.

玻璃面板固定在前挡板上, 周围有十四块磁铁。

将两个吸盘固定在玻璃面板的对角上。

要连接我们销售的吸盘, 首先将吸盘口与玻璃面板表面平行放置。轻轻握住吸盘并转动可动手柄, 直到它与其他手柄平行。

如果你的吸盘无法吸附,尝试清理玻璃面板和吸盘的接触面。

Ваш вклад лицензируется под свободной лицензией Creative Commons.