Перейти к основному содержанию

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 21 guides that include this step.

Английский
Китайский
Step 2
Remove the two T6 Torx screws securing the display data cable to the logic board. Use the attached black tab to pull the display data cable connector straight away from the logic board.
  • Remove the two T6 Torx screws securing the display data cable to the logic board.

  • Use the attached black tab to pull the display data cable connector straight away from the logic board.

移除将显示屏数据排线固定在主板上的两颗T6星形螺丝。

使用黑色的拉条将排线头从主板拉起。

Ваш вклад лицензируется под свободной лицензией Creative Commons.