Skip to main content

Notice: You are now editing a prerequisite to the guide you were just viewing. Any changes you make will affect all 4 guides that include this step.

Английский
Китайский
Step 5
Insert the flat end of a spudger between the SATA data cable and the edge of the hard drive. Twist the spudger to separate the SATA data cable from the hard drive.
  • Insert the flat end of a spudger between the SATA data cable and the edge of the hard drive.

  • Twist the spudger to separate the SATA data cable from the hard drive.

  • Disconnect the SATA data cable from the hard drive.

  • Repeat this process for the SATA power cable.

  • Lift the hard drive out of your iMac, minding the thermal sensor cable that may get caught.

将撬棒平直端插入SATA数据排线和硬盘边缘中间。

扭动撬棒来将SATA数据排线与硬盘分离。

断开SATA数据排线与硬盘的连接。

使用同样的操作来断开SATA电源排线的连接。

将硬盘移出您的iMac,小心有可能刮到热感应器排线。

Ваш вклад лицензируется под свободной лицензией Creative Commons.