Перейти к основному содержанию

Remplacement de l'écran complet de l'iPad Pro 12.9"

Руководство по Предпосылкам

Все необходимые инструкции должны быть переведены до того момента, как этот перевод будет считаться завершённым.

iPad Pro 12.9" Display Assembly Replacement

Remplacement du bouton home de l'iPad Pro 12.9"

Информационный справочник

= Готово = Не завершен
Display Assembly
iPad Pro 12.9" Display AssemblyScreen Replacement
Remove the display assemblyscreen, including the LCD, digitizer, and home button from an iPad Pro 12.9" to replace it or access internal components.
    Follow the steps in this guide to replace the display assemblyscreen in an iPad Pro 12.9", or to access other internal components for servicing.
    Note that the Home Buttonhome button installed in your original display assemblyscreen is paired to the iPad's logic board, and will need to be [guide|95750|removed and transferred to the new display|new_window=true]screen to retain Touch ID functionality.
    '''***Before beginning, check to see if your replacement part has a daughterboard adhered to its back.'''*** If so, this guide will work for you. Otherwise, you will need to transfer the board from the old displayscreen to the new one. Transferring the daughterboard from the original to replacement unit will require specialty microsoldering equipment and we recommend DIY users source a new part rather than attempt the procedure.
    Parts of this guide were shot with a Wi-Fi model and as such the internals may look slightly different from the LTE model. The procedure is the same for both models except where noted.
    '''Warning: the battery isolation method in this guide is outdated, and may result in irreversible damage to the battery pins of the logic board, effectively destroying it. If you choose to isolate the battery this way, heed all warnings and work extremely carefully. If you choose to complete the guide without isolating the battery, avoid using metal tools except when completely necessary (like when removing screws) to prevent shorting the battery and damaging sensitive circuit components'''
    The opening procedure for this iPad Pro is shown using a Halberd Spudger. If you don’t have one, ***you can use an opening pick instead***—the process is the same.
      To reassemble your device, follow these instructions in reverse order.
      Compare your new replacement part to the original part—you may need to transfer remaining components or remove adhesive backings from the new part before installing.
      ***To reassemble your device, follow the above steps in reverse order.***
      Take your e-waste to an [[E-Waste|R2 or e-Stewards certified recycler|new_window=true]].
      Repair didn’t go as planned? Check out our [link|https://www.ifixit.com/Answers/Device/iPad%20Pro%2012.9%22|Answers community] for troubleshooting help.

      Опишите определенную часть или деталь того, device над чем вы работаете. Прим: Аккумулятор

      Создайте заголовок.

      Это краткое описание появится только в результатах поиска.

      Укажите общую информацию прежде чем читатель начнет читать инструкцию.

      Шаги руководства

      Шаг 1

      Шаг 2

      Ваш вклад лицензируется под свободной лицензией Creative Commons.