Перейти к основному содержанию

Примечание: Вы редактируете необходимое руководство. Любые внесённые вами изменения влияют на все 17 руководства, которые включают этот шаг.

Английский
Итальянский
Шаг 4
Carefully slide the flat end of a spudger underneath the display cable to separate the adhesive holding it to the lower case. Take care not to damage the cable. If the adhesive is very strong, heat the case directly beneath the cable with an iOpener to soften the adhesive, and then try again. Take care not to damage the cable. If the adhesive is very strong, heat the case directly beneath the cable with an iOpener to soften the adhesive, and then try again.
  • Carefully slide the flat end of a spudger underneath the display cable to separate the adhesive holding it to the lower case.

  • Take care not to damage the cable. If the adhesive is very strong, heat the case directly beneath the cable with an iOpener to soften the adhesive, and then try again.

Fai scorrere attentamente la parte piatta di uno spudger sotto il cavo dello schermo per separarlo dall'adesivo che lo fissa alla copertura inferiore.

Stai attento a non danneggiare il cavo. Se l'adesivo è molto resistente, scalda la copertura sotto il cavo con un asciugacapelli o un iOpener per ammorbidire l'adesivo, quindi riprova.

Ваш вклад лицензируется под свободной лицензией Creative Commons.