Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 40 guides that include this step.

Английский
Итальянский
Шаг 4
Remove the following three screws securing the right fan to the logic board:
  • Remove the following three screws securing the right fan to the logic board:

  • One 4.4 mm T5 Torx screw

  • One 3.9 mm T5 Wide Head Torx screw

  • One 5.0 mm T5 Torx screw with 2 mm collar

Rimuovi le seguenti tre viti che fissano la ventola di destra alla scheda logica:

Una vite Torx T5 da 4,4 mm

Una vite Torx T5 da 3,9 mm a testa larga

Una vite Torx T5 da 5,0 mm con una parte cilindrica lunga 2 mm

Ваш вклад лицензируется под свободной лицензией Creative Commons.