Перейти к основному содержанию

Notice: You are editing a prerequisite guide. Any changes you make will affect all 22 guides that include this step.

Английский
Итальянский
Step 4
Remove the eight 12 mm T8 Torx screws securing the display panel to the rear case. Lift the display panel from its left edge and rotate it toward the right edge of the iMac.
  • Remove the eight 12 mm T8 Torx screws securing the display panel to the rear case.

  • Lift the display panel from its left edge and rotate it toward the right edge of the iMac.

Rimuovere le otto viti Torx T8 da 12 mm che fissano il pannello del display al case posteriore.

Sollevare il pannello del display dal bordo sinistro e ruotarlo verso il bordo destro dell'iMac.

Ваш вклад лицензируется под свободной лицензией Creative Commons.