My red standby led blinks twice when I try to turn on my tv.
The standby led (red) blinks 2x
Просмотр:
Прошло всего голосовЛюбой пользователь с репутацией больше 20 может отмечать комментарии и посты как проблемные.
Показать детали
Репутация: 217
Опубликовано:
The standby led (red) blinks 2x
Репутация: 685,3к
Опубликовано:
Two blinks - B+ over current protection (OCP), unit goes to the standby mode then displays the 2 blink fault. Could be a short in the power supply of any of the circuits.
IMPORTANT: After you repair the unit, you MUST clear the values on this diagnostic screen. These codes do not reset themselves after the fault is corrected, so if you don't clear them, you'll be seeing "old" fault codes the next time you enter this screen. Clearing is done by going into the service mode (display, channel, 5, volume plus, then power ). Press 8 and Enter, which returns everything to the factory preset condition.
Ой! Я хотел бы изменить свое мнение.
Развернуть / свернуть
Пройден
Наверх
Ошибка
Вниз
Открыть справку
Страница 1 из 1