Перейти к основному содержанию
« Обратно ко всем историям

Saved from the recycle bin

Bob G -

MacBook Pro 13" Unibody Early 2011

MacBook Pro 13" Unibody Early 2011 Display Replacement

MacBook Pro 13" Unibody Early 2011 Display Replacement

1 час

Difficult

Моя проблема

A grad student dumped about 5 gallons of coffee on his MacBook Pro. I saved his files and all he wanted was the hard drive and the files. He asked me to scrap the early 2011 MacBook for him. It just seemed to good to toss. The main issue seemed to be the display. I slaved it to a small LCD monitor and was able to function normally.

Моё решение

After drying the MacBook over my hot air vents for 2 weeks I ordered a new display assembly from IFixIt. I got it in a few days and followed the guide VERY carefully. It took me 3 hours and boy was I happy when I powered it up and it looked great. I had put in an old 320GB drive and after powering up I re-imaged it with ML 10.8. Next up is to figure out why the Super Drive doesn't work.

Мой совет

See my comment, by Bob G, at: MacBook Pro 13" Unibody Early 2011 Display Replacement

MacBook Pro 13" Unibody (Early 2011-Late 2011) Display Assembly Изображение
MacBook Pro 13" Unibody (Early 2011-Late 2011) Display Assembly

$89.99

« Обратно ко всем историям

Комментариев: 0

Добавить комментарий