This teardown is in progress – Reload periodically to see the latest changes!

Инструменты для этого Разбора

  1. There are three blue LEDs to show you the power in the battery.
    • There are three blue LEDs to show you the power in the battery.

    • There is also a handy LED to see what you are doing in the dark.

    Добавить комментарий

  2. The bottom of the device.
    • The bottom of the device.

    • It's time for some prying. Take out the rubber plugs at the bottom of the device.

    • Remove the screws which are underneath the plugs.

    Добавить комментарий

  3. Spread Fixmas Cheer
    Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
    Spread Fixmas Cheer
    Получите $12 за покупку от $50 и выше с промокодом FIXMAS12
    • use a flathead screwdriver or a spudger to pry open the device.

    • Don't pry at the front of the device - there are a few hooks and you do not want to break them.

    Добавить комментарий

    • A first glance at the inside: a big battery and the logic board.

    • There is a 1800 mAh battery in it.

    • There are two screws in the logic board, the battery is glued to the casing.

    Добавить комментарий

    • The other side of the electronics.

    • And the logic board.

    Добавить комментарий

    • And there it is: the A-Solar PowerBank AL-200 torn down.

    • It was easy to do.

    Добавить комментарий

storm

Участник с: 07.07.2012

497 Репутация

Автор 2 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 1

За 7 дней: 6

За 30 дней: 29

За всё время: 3,309