Перейти к основному содержанию

Инструменты для этого Разбора

Это демонтаж а неруководство по ремонту. Чтобы отремонтировать AWEI BT Earbuds, воспользуйтесь нашим сервисным руководством.

  1. Remove Earbud Cushion Remove Earbud Cushion
    • Remove Earbud Cushion

  2. Secure Earbud End (eg:Vice)
    • Secure Earbud End (eg:Vice)

  3. Using Pliers Gently Twist & Pry Away Sections, Do Not Twist more than 3-4mm Using Pliers Gently Twist & Pry Away Sections, Do Not Twist more than 3-4mm
    • Using Pliers Gently Twist & Pry Away Sections, Do Not Twist more than 3-4mm

  4. Inspect Earbud Wiring
    • Inspect Earbud Wiring

  5. Using a small pick or pry tool, separate Receiver Housing. Each side is secured by 3 small fragile tabs. Use the space near the micro USB opening & carefully pry to separate the 3 tabs on the opposite side. Using a small pick or pry tool, separate Receiver Housing. Each side is secured by 3 small fragile tabs. Use the space near the micro USB opening & carefully pry to separate the 3 tabs on the opposite side. Using a small pick or pry tool, separate Receiver Housing. Each side is secured by 3 small fragile tabs. Use the space near the micro USB opening & carefully pry to separate the 3 tabs on the opposite side.
    • Using a small pick or pry tool, separate Receiver Housing. Each side is secured by 3 small fragile tabs. Use the space near the micro USB opening & carefully pry to separate the 3 tabs on the opposite side.

  6. Carefully Separate the PCB to inspect the headphone's left & right earbud wiring. Cleaned up any broken connections by de-soldering, re-tinning wires & re-soldering to the PCB. Each side is labeled L + L - and R + R - the colored wire is positive and the bare wire is negative. Assemble Unit in reverse order. Assemble Unit in reverse order.
    • Carefully Separate the PCB to inspect the headphone's left & right earbud wiring. Cleaned up any broken connections by de-soldering, re-tinning wires & re-soldering to the PCB. Each side is labeled L + L - and R + R - the colored wire is positive and the bare wire is negative.

    • Assemble Unit in reverse order.

fugitiveALiEN

Участник с: 28.02.2013

188 Репутация

1 руководство автора

Команда

My Techno Guy Участник My Techno Guy

Business

1 член

Автор 2 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 1

За последние 7 дней: 7

За последние 30 дней: 40

За всё время: 997