Перейти к основному содержанию

Выберете то, что вам нужно

Это демонтаж а неруководство по ремонту. Чтобы отремонтировать Apple Universal Dock Model A1256, воспользуйтесь нашим сервисным руководством.

  1. Apple Universal Dock Model A1256 Teardown, Apple Universal Dock Model A1256 Teardown: шаг 1, изображение 1 из 1
    • Pry along the edge of the bottom of the case. It will just pop out.

  2. Apple Universal Dock Model A1256 Teardown: шаг 2, изображение 1 из 1
    • Remove the top case from the bottom.

  3. Apple Universal Dock Model A1256 Teardown: шаг 3, изображение 1 из 1
    • There are five Phillips screws holding the metal brace down (In the picture I have already removed them).

  4. Apple Universal Dock Model A1256 Teardown: шаг 4, изображение 1 из 2 Apple Universal Dock Model A1256 Teardown: шаг 4, изображение 2 из 2
    • The brace is glued in near the ir-sensor. You may have to apply a little bit force to remove it, but it will come out with just pulling. (You can pry it a little bit with a spudger or a screwdriver)

  5. Apple Universal Dock Model A1256 Teardown: шаг 5, изображение 1 из 2 Apple Universal Dock Model A1256 Teardown: шаг 5, изображение 2 из 2
    • The only major chip located on the circuit board. (All those who have wondered about the dock's line out, I think we are clear now.)

Devilac

Участник с: 06/23/10

67 Репутация

1 руководство автора

Один комментарий

Can the actual dock insert (the section the iPod would clot on top of) be used in an Apple iPod HiFi repair? (see repair article Apple iPod Hi-Fi iPod Dock Inserts Replacement)

Harrison C - Ответить

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 11

За последние 30 дней: 47

За всё время: 24,606