Эта версия возможно содержит некорректные исправления. Переключить на последнюю проверенную версию.
Выберете то, что вам нужно
-
Этот шаг не переведен. Помогите перевести
-
Put the tweezers (in their closed state) into the indentations on the side of the calculator.
-
Slowly open the tweezers, to split the calculator into two halves.
-
-
-
Этот шаг не переведен. Помогите перевести
-
Use a pair of tweezers to pull the connector out of its holder.
-
Use a screwdriver to lever the connector out of its housing.
-
-
Этот шаг не переведен. Помогите перевести
-
Insert a spudger in between the PCB and the rubber button holder.
-
Carefully remove the PCB and make sure not to damage the LCD ribbon cable.
-
-
Этот шаг не переведен. Помогите перевести
-
Peel off the rubber button holder starting in the top left corner.
-
-
Этот шаг не переведен. Помогите перевести
-
Back part of the case.
-
Front face of the case.
-
PCB with LCD and battery terminals.
-
Rubber button holder.
-
Buttons.
-
Отменить: Я не выполнил это руководство.
10 участников успешно повторили данное руководство.
Один комментарий
I veganlover loved this guide although it isn’t vegan enough.