Перейти к основному содержанию

Это демонтаж а неруководство по ремонту. Чтобы отремонтировать Clevo Sager Eurocom P650RG G, воспользуйтесь нашим сервисным руководством.

  1. Not a full teardown; just board photos (both sides) and things that I couldn't find on the Internet easily.
    • Not a full teardown; just board photos (both sides) and things that I couldn't find on the Internet easily.

  2. Internal battery, 60Wh
    • Internal battery, 60Wh

  3. Top assembly. Screen is attached to top case. The two 2W speakers are quite large and sound fairly nice, surprisingly. Doesn't look like they're ported enclosures.
    • Top assembly. Screen is attached to top case.

    • The two 2W speakers are quite large and sound fairly nice, surprisingly. Doesn't look like they're ported enclosures.

  4. The copper heatsink is screwed onto the bottom cover. The CPU fan draws air through this area (not a lot though).
    • The copper heatsink is screwed onto the bottom cover. The CPU fan draws air through this area (not a lot though).

    • Copper heatsink with heat pads for the CPU and GPU voltage regulator MOSFET/inductors. During reassembly, make sure no wires cover the MOSFETs

  5. Board Photos bottom side Board Photos bottom side Board Photos bottom side
    • Board Photos bottom side

  6. Intel Core i7-6820HQ, DDR4 RAM, GTX980M can be seen here. Intel Core i7-6820HQ, DDR4 RAM, GTX980M can be seen here. Intel Core i7-6820HQ, DDR4 RAM, GTX980M can be seen here.
    • Intel Core i7-6820HQ, DDR4 RAM, GTX980M can be seen here.

Larry Chen

Участник с: 22.04.2013

904 Репутация

Автор 5 руководств

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 1

За последние 30 дней: 8

За всё время: 3,324