The Google Home Mini opens from the bottom There is an orange plastic disc with a piece of orange rubber attached to it. The piece of orange plastic is glued to the device.

Use the metal spudger and place it between the housing and the rubberized plastic disc.

Now move around with the spudger under the plastic plate until the adhesive has dissolved on the entire surfacem

Next, carefully peel the plate off.

Now remove the 4 screws.

4 x 6mm T6 screws

After turning the device over, you can gently lift the fabric-covered top.

Now loosen 4 more screws on the top of the unit

4 x 8mm T9 screws

Now remove the speaker cable with a spudger.

Next, loosen 4 more screws

4x 9mm T6 screws

Now remove the metal insert and carefully lift the board with a spudger

Motherboard

Microphones

Status LEDs