Перейти к основному содержанию

This teardown is not a repair guide. To repair your Nokia 2605, use our service manual.

  1. Red arrows indicate which screws must be removed in order to get to the motherboard.
    • Red arrows indicate which screws must be removed in order to get to the motherboard.

  2. Take T5 torx and remove all 3 screws.
    • Take T5 torx and remove all 3 screws.

  3. Wedge a flat head in between the back and phone exterior starting at the bottom corners.
    • Wedge a flat head in between the back and phone exterior starting at the bottom corners.

    • As you move toward the top, remove the camera and volume buttons.

  4. Remove the back, being careful not to detach the motherboard from the back and to not pull them fully out (both attached at the upper left corner by a black strip). Remove the back, being careful not to detach the motherboard from the back and to not pull them fully out (both attached at the upper left corner by a black strip).
    • Remove the back, being careful not to detach the motherboard from the back and to not pull them fully out (both attached at the upper left corner by a black strip).

Dorsa

Участник с: 07.11.2013

143 Репутация

1 Guide authored

Команда

Комментариев: 0

Добавить комментарий

Просмотр статистики:

За 24 часа: 0

За 7 дней: 0

За 30 дней: 2

За всё время: 1,031