Перейти к основному содержанию

Выберете то, что вам нужно

Это демонтаж а неруководство по ремонту. Чтобы отремонтировать TP-LINK Wireless 2-Way Audio Surveillance Camera, воспользуйтесь нашим сервисным руководством.

  1. TP-LINK 2-Way Audio Wireless Surveillance Camera Wireless Card/Shield Teardown, Remove the screws: шаг 1, изображение 1 из 1
    • Remove the 2 screws holding the back cover!Should be fairly easy(You need a Phillips Screwdriver)

  2. TP-LINK 2-Way Audio Wireless Surveillance Camera Wireless Card/Shield Teardown, Remove the Back Panel: шаг 2, изображение 1 из 1
    • This is also fairly easy to do!You can use your hands to pull it off!Put first use a flat screwdriver to open the "clips"

  3. TP-LINK 2-Way Audio Wireless Surveillance Camera Wireless Card/Shield Teardown, Remove the Board!: шаг 3, изображение 1 из 1
    • Remove the board from the Surveillance Camera!

  4. TP-LINK 2-Way Audio Wireless Surveillance Camera Wireless Card/Shield Teardown, Remove the Wireless Card!: шаг 4, изображение 1 из 1
    • Remove the wireless card which is hold by 2 "clips"!

  5. TP-LINK 2-Way Audio Wireless Surveillance Camera Wireless Card/Shield Teardown, Disconnect the Antenna Cable!: шаг 5, изображение 1 из 1
    • Remove the cable antenna now!And thats it you are done,now just follow the guide in reverse and install your new wireless card/antenna if also needed!

    • WARNING:DO THIS CAREFULLY!ITS SUGGESTED THAT YOU DO THIS STEP SLOWLY!TAKE YOUR TIME OR YOU MAY DAMAGE THE CABLE OR EVEN THE BOARD!

Marios

Участник с: 01/23/15

64 Репутация

1 руководство автора

0 Комментариев

Добавить комментарий

Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 7

За всё время: 1,532