Перейти к основному содержанию
Редактирование шага 9 —

Тип шага:

Перетащите чтобы изменить порядок

Next come the dual USB ports, which are mounted on a small PCB.

The PCB is connected by two #1 Phillips screws, as well as a connector that runs to the motherboard.

A thorough USB board analysis reveals a 220 μF capacitor, a PTC Fuse to protect against faulty USB devices, ESD Protection hardware (Clamp diodes and series inductors), and two USB sockets.

Ваш вклад лицензируется под свободной лицензией Creative Commons.