Перейти к основному содержанию
Помощь
Редактирование шага 5 —

Тип шага:

Перетащите чтобы изменить порядок

After a good twenty #00 Phillips screws were removed from the perimeter of the device, we managed to separate the rear cover.

A ribbon cable for the rear control buttons and a hefty 40 pin cable responsible for transmitting information to the rear display still attached the rear cover to the rest of the camera.

Fun fact: to eliminate the complexities of a slip ring on the rotating rear display, its motion is limited to 180 degrees.

Ваш вклад лицензируется под свободной лицензией Creative Commons.