Помощь
Событие | Количество | Разница |
---|---|---|
Запись получила положительную оценку | 57 | 684 |
принял ответ | 16 | 480 |
Кто-то закончил ваш гид | 31 | 441 |
Администратор утвердил Ваше руководство | 3 | 300 |
Кому-то понравилось Ваше руководство | 15 | 64 |
Принятый ответ | 2 | 20 |
Опубликовать голосование, содержащее ссылку на ваше руководство | 1 | 3 |
Организован патрулем в руководстве | 4 | 2 |
Запись получила отрицательную оценку | 3 | -18 |
Проголосовать против данного сообщения | 21 | -42 |
It might be possible through the use of thunderbolt pass through dongle but those are expensive and would require even more hardware and bulky solution. I’d recommend just using a car charger with usb pd 65w and soldering a MagSafe socket to it. Two cable solution but now the display can charge your MacBook usb c
here from the future: step13 interesting to see the flash memory packages so much larger than the main ARM AP/CPU. back then flash memory wasn’t available in large enough capacity i guess
Well never mind. iPad came in and has usb2
yes the port is double side. seems the usb3 controller is integrate into the SOC this time around.
usb 3. see here it uses same 16 pins lightning port as pro 10.5 :D https://www.mobilesentrix.com/charging-p...
biggest thatll fit the frame without overlapping with the lcd part. most displays nowadays come with a frame or at least adhesive
one can upgrade the SSD, in this unit it is the large IC labelled TOSHIBA. I came here for the layout/orientation of the SSD/NAND chip haha
Yes they will
Really late but I agree, I refurb these earbuds a lot and came here to check which is the ground pad and which is the positive on the lil drivers
Where can you find the replacement parts?
Этап 1 из 3
Далее