Make contributor | DIYer | electronics | coffee addict | Linux geek | for more info and projects please visit my blog http://ashleyslab.co
Разборки, над которыми я работаю
Ответ на "USB Inductive Charger Pins 2 & 3."Hi there, You can put a new USB Type A connector on there. They are arranged as the following (1) VCC (2) D- (3)D+ (4)GND. (optional but recommended: connect the cable shield to the connector shell of the new connector) The Data lines are bing used to see what type of charger it is. That also allows is to see how much current it can pull from the charger. I hope this has helped you.
Ответ на "Headphones will charge, but they will not make a sound?"Hi there, Have you tried to plug them in to an audio source using the aux cable? (the aux in on the headphones uses the same traces as if the bluetooth mode would. If that works try to use the beats updater http://your.beatsbydre.com/ and try to do a firmware update /reset
Ответ на "Beats won't turn on"Hi Maks, Have you tried to reset them? The Beats support page has a KB page about it. https://www.beatsbydre.com/support/how-to/reset-solo2-wireless I hope this helps.