The screws to get the drive caddy off are T10. Take out the screws set in a little bit, not the wide ones.
The only way I found was to clone the disc sector-by-sector. I read online that you can expand it by making the “user content” partition larger.
If you’re just trying to get to the hard drive, I would recommend leaving the BD-ROM connected and just turn and rest it on the fan.
These are also T10 like in Step 8
I had to slide it forward off of the disc drive a little bit before I could lift up.
My manufacture date is 15-JUN-18 and is not a Scorpio and is still T10. I would not recommend using a T9.
You can use a T8 or T9 for this step. I was able to get all three screws with a T9 but there’s so little difference that both will work.
To anybody wondering what the picture was, Internet Archive saved it. You can find it here: https://web.archive.org/web/201606120038...
It’s also the same picture as the 2nd picture in Step 23.
Because Apple wants you to just buy a new phone instead of replacing parts.
Using the iFixit tweezers to remove the bracket caused a spark. I used the plastic spudger instead.
Однажды Они, Вы смогут просмотреть график вашего рейтинга, накопленного за всё время.
Репутация еще не заработана.