da stumer

Hello, I’m currently trying to swap motherboards between two Galaxy Note 4s, as one won’t power on but has a good looking scr...

I recently bought a new housing for my iPhone 6 similar tothis, which makes the iPhone 6 look like an iPhone 8, as my phone w...

I just got a new digitizer for a smashed iPad Air, and I noticed that the home button is kind of sunken, and seems to be miss...

Long story short, I had to disassemble the computer to reattach the display assembly, and since then I've noticed odd behavio...

I just bought a used MacBook Air that happens to be missing the rubber around the display. I bought a replacement gasket, and...

Hello, I've been working on this iMac for a while, and just when I thought everything was working ok, I plugged in a pair of ...

Hello, I noticed that whenever I turn on my printer, it makes this very loud banging sound. I managed to narrow it down to a ...

Hello, I just got a mid 2010 27" i7 iMac, and it has graphics failure, I'm pretty sure. It has artifacts on the screen, which...

I bought this MacBook used, it was fairly dented up, and I just dropped it making it worse. Is it possible to pound this dent...

Hello, I just bought one of these off of eBay with the description saying that it got the flashing folder. I open it up, and ...

If your screen was bulging out, it seems more likely due to the battery swelling than the screen being faulty. Have you inspected the battery at all? It could be that it died and won’t take a charge. Also try putting the old screen back on and see if it works, and report back.

You could try PRAM and SMC resets. I doubt those would do much, but it’s worth a shot. Since your computer is only a few months old, you should still be within Apple’s 3 month warranty period. I would take it to an Apple store, they will probably replace it free of charge if they can’t fix it. Taking it apart now would ruin any kind of warranty you would have. To me it looks like a loose display connector, or a chip is coming off the board.

That happened on one of mine as well. It is sometimes possible to take a large flathead screwdriver and turn the mechanism with that rectangular hole in the middle, although it can be a little tricky to do. I ended up resorting to tape because it was too much of a hassle. From what I can tell, there isn’t really a way of fixing that unless you replace the entire bottom case, which is a pretty big task and honestly isn’t worth doing for a computer that old, unless it is really important to you. Here is the guide for that: MacBook Core 2 Duo Lower Case Replacement

If you stick the hard drive in another computer it will boot and you will be able to access your files, although you might have a couple driver issues. This can be fixed by running windows update. Windows will also deactivate, but you can reactivate it using the license key on the bottom of the computer, or it will automatically activate via a product key in the BIOS, depending on the computer. Sounds like your computer is pretty toast though, you could try repairing it, but you are probably better off with a new one at this point.

I have both a 2005 PowerBook G4 DLSD/HR and a 2006 MacBook Pro. While they look similar, none of the parts are interchangeable. The dimensions are slightly different, as the MacBook Pro is a tad wider than the PowerBook. Even if you cut down the edges of a MacBook Pro keyboard to somehow fit, the trackpad is still a different shape and would not function with the powerbook, and I doubt the keyboard would either. The displays are different shapes, the powerbook display is 60 pixels taller due to the MacBook Pro having a webcam while the PowerBook doesn’t, Your best bet is to buy parts computers off of eBay, or go down to a local tech thrift store or recycling center, as people are still getting rid of their old ones. These are fun computers to play with, and I have found that even on 10.5 Leopard they are still somewhat usable. Good luck!

Figured it out, it took a lot of pressure, but there are clips along both sides that need to be undone as well, and are difficult to get at without a long pry tool

The question mark folder means that the computer can’t find an operating system to boot too. Sounds like either the update failed and corrupted your installation or your hard drive died during the update. You can try holding command r while booting to boot to recovery and see if you can use disk utility to repair your disk. If that is unsuccessful, you can try erasing your drive and reinstalling macOS if your drive is still good. If you have data you need to recover, you can boot the Mac into target disk mode by holding t (Before you wipe the drive) and using a firewire or thunderbolt cable to connect it to another Mac and copy off the data.

With some models there is a thin plastic ring that is adhered on the screen between the home button and the glass. I have found that a lot of replacement digitizers do not have this plastic ring on them, even if they include a home button. You may have to transfer over this part.

Most of those screens should fit, I believe the iPad Air, 2017, and 2018 iPads all share the same digitizer, the only difference being the home button. If you are not sure about the quality of the parts, iFixit carries replacement digitizers in their online store which will work just fine, and are higher quality than what you will find with Amazon/eBay.

Do you still have the original battery? It could be that the replacement was just poor quality and happened to fail after not being used for a while. If you have the original battery you could try putting that back in to see if the issue is resolved, or try getting a battery with a lot of positive reviews.