Ответ на "Surface Pro 4 won't turn on at all after battery replacement"Hallo I could now solve my Problem i had made video about this Problem . I found demage resistor 0.01 ohm you can watch it on my Video chanel https://youtu.be/6ydT_RxYt-k https://www.youtube.com/channel/UCWqHW1O... i use oil and heating pad for disassembley and solve glue
Ответ на "Surface Pro 4 won't turn on at all after battery replacement"Thank you @stefano.gunella for answering . the contacts seems ok but could be the reason the that i use not the original Battery. i have destroyed old Battery but i can try to repair the original battery. in the laptop come the 8 V but i do not measore the 3.3V i only measure 8V from Battery. i also measure 800 Ohm on the 3.3 V line is this normal? Thank you very much for Tipps on my you tube chanel christian Reber i will in future to show ease trick for opening. i had a good Tipp for you i use heating Pad 80 grad an little light oil for glue opening. Also some platic so it is not so difficult open surface
Ответ на "Surface Pro 4 won't turn on at all after battery replacement"i had the Problem That my surface pro 4 is dead after i replace Battery. There is no 3V on Chip IT8528VG- i have Replace the IT8528VG but the battery is not charging and the surface is not starting it es dead i only mesure 8 V which came from my Battery. I also found this interesting Blog https://www.aonemobiles.com.au/2020/03/m...-surface-pro-4-no-power-no-schematics-no-problem/ but i still not have the 3V. has any Person an Idea?