None of the above options by the other commenters worked for me, but I found a video that points out there's a little hole right in the middle of the "SEE PRINTED MANUAL" and "UL" on the sticker under the Xbox 360 warranty sticker that I stuck a sewing needle into and it unlatches the latch: https://youtu.be/7mC8ckDvKqc?si=CVyCszpF...

Warm soapy water works well to clean the membranes. Do pay attention to the temperature of the membrane, as it can get very hot to the touch easily.

The circuit under the membrane is multi-layered, maybe the wine got in between the layers.

Make sure that the rubber membrane is making contact with the pads on the plastic sheets. If they are, make sure the connector is fully plugged in. If it is, make sure the keyboard is plugged into the right USB port.

What’s the problem with my phone? It shows the Apple Logo but it shows a black screen after. What happened?

You should probably replace the water damaged motherboard.

You probably did something wrong when putting the phone back together.

Why did you follow a teardown to replace the LCD display? I thought that iFixit has a LCD display guide for this phone.

You should probably plug in the phone. I’m only saying this because most Android phones turn on when you plug them in.