Завершенные руководства
Мои истории
Power button stopped working
iPhone 4S Power and Sensor Cable
3G turned out as new
iPhone 3G Battery
Помощь
Меню
Your Settings
Отмена
| 1 | Репутация |
| 0 | Ответов |
| 0 | Инструкций |
| Пользователь с 17.07.2011 | |
iPhone 4S Power and Sensor Cable
iPhone 3G Battery
Однажды Они, Вы смогут просмотреть график вашего рейтинга, накопленного за всё время.
Предпросмотр графика:
Репутация еще не заработана.
Thumbs up for this tip. I left it out in the sun for 15 min only and it worked a treat. I used a razor blade. The plastic tools are next to useless.
Yep, I had exactly the same problem. The alignment was way off.
The clip has a hole and a groove. This is good enough to grab it with some pin tweezers from the top when replacing it.
Yes, this is hard. It would be a lot easier if the guide had a picture of the retainer clip. I was successful with a spludger by lifting it on the upper left hand corner. Once you have it off, have a good look at it before putting it back on. Remember that it clips to the outside of the camera housing.