No Image on DisplayHello Everybody, I'm new here and I try to do my best with my english. My ACD 24" Don't work. It will be not detected from...
Ответ на "Damaged display power header whilst replacing hard disk drive"Dear Friend, I had the same problem. The connector you need is from Molex. Excatcly the same is not possible to buy, because was made just for Apple LG. I find by Molex the connector has this part number 53780-0670. I purchase it from Mouser electronics under 2€. I think is the same, just not black but white. You can replace it or someone who can fine solder. Yo save a lot of money, believe me! I hope I can help you with this information. Let me know. Bye Bye Update: Hello Adam, If I understand the part you me must be this one http://www.digikey.com/product-detail/en/BLM18PG221SN1D/490-5221-1-ND/1948397 It is a ferrite chip who are responsible for the 12v on LCD Display port. I tok this information from the schematic of Imac 21,5" who has the same connector. I hope this is the part you need. Good Luck! Yako