Ответ на "How to remove broken display"I put a piece of clear packing tape over my cracked screen to get the suction cup to work. It's really quite tight, the guitar pick is a great idea.
Ответ на "How do I fit the screen back onto a bent bezel?"The screen is an exceedingly tight fit. Although your phone may be bent, I had a tough time with mine and it isn't. Make sure at the top you have the little notches in the screen slid in the proper place under the case bezel. Then work from the top down snapping it in going back and fourth. When you get to the bottom, I used a tiny flat head screw driver to lightly pry the screen upwards on the phone while gently pressing down(inwards). Little bit of wiggling and in it went. The first part getting the notches lined up is the key. If you're convinced the phone is bent, it's aluminum. Pretty easy to form, or if you just need a touch of room you could use a nail file. My guess is that it's just a tight fit tho. Good luck!
Ответ на "iPhone 5 cracked glass, but the screen still works"As a non industry guy, but skilled with my hands, I was able to separate the glass from the digitizer successfully using basic tools. And somewhat followed the Chinese video above. I took the screen all down, and due to the severe shattering of my phone I had to remove the bits of glass piece by piece. I did this using a hot plate, temp gun to make sure I didn't overheat it, duck brand adheasive remover I got locally and a guitar string along with a very tiny flat head and the plastic scraper. Because the screen was so shattered it took me the better part of two hours to get all the glass off. Soaked the whole thing in the adheasive remover and then warmed it up on the hot plate, trying to keep around 160 degrees. Different chunks required different tools, but the majority I got off with the scraper. Then I repeatedly soaked the LCD in the remover stuff and gently wiped it down. I still scratched it pretty bad thanks to the tiny glass shards, but it looks good at night. Got the LCD totally clean, glued the...