The display assembly has a metal retaining clip attached to the airport cables. I didn’t notice how this was positioned during disassembly, and it wasn’t mentioned in the guide. When I was reassembling the device, I found that it fit perfectly over the Torx T8 screws holding the display to the case. Attaching it here holds the airport cables nicely in place and out of the way.
My airport cables on my model A1425 were also as @kagnew described, not as written in the guide.
This was a P5 screw not a T5 on my model A1425.
On my model A1425 these were all 1.2mm P5 screws. They all looked the same to me.
Однажды Они, Вы смогут просмотреть график вашего рейтинга, накопленного за всё время.
Репутация еще не заработана.