Hi Max, this seems to be sensor issue not the logic board this issue covers by warranty you can check your warranty status from the link https://www.hgst.com/warranty/index_gtec... also have look to the brand policy as mentioned in there web site Field Replaceable Parts - G-SPEED FC / G-SPEED XL Products If you have a G-SPEED FC and XL product and require a replacement part, please contact G-Technology support for a parts RMA (i.e. power supply, fan or controller board) For all multi-bay units with removable hard drive assemblies: To replace a failed hard drive, please remove the drive from the assembly (drive sled or tray) by removing the attaching screws After obtaining an RMA, ship the bare drive to G-Technology and a replacement drive will be returned
Hi Leslie, Sorry for your iPhone _-.-! - the digitiser connector need to be replaced - the difficulty = Hard - Yes you need skills in micro soldering but you can do it if you buy the kit and watch the learning videos to make the fix properly . ^,^
Hi Harvey, Usualy this caused by uncompleted Update or power lost while updating, how ever i recommend you to 1-Backup your data using iTunes 2-After that restore your iPhone using iTunes 3-Try to remove the SIM card and use the iPhone for a while without the SIM card 4-Do not use non original charger or charging cable if non of these works " replace the phone battery" (1) there are recall program for iPhone 6s because some iPhone 6s models has an issue with battery
Hi you need to replace LCD backlight iC , at repair shop this is one of the most common issues for iPhone 6 some time when you heating up the iC it works But i recommend to visit repair shop to replace it
Hi You have too options 1- take your mac to repiere shop who offers components micro solidring 2- replace the logic board "recommended" *note: your data will be safe if the water did not reached your ssd . good luck
Hi If there is liquid spilled inside the mac you will notice the fan works continuesly so fast. However you have to offer more details about the liquid areas. 1- if the logic board damaged I recommend to replace it even better 2- if the upper case damaged you need to replace the keyboard case and the track pad controller If non of these works try to reatore the system to factory settings.
Hi buddy This is usually happens for tow reson 1- over heating 2- blueray reading lens Solution: 1- take your ps4 to repiere shop for cleaning or you can do it if have the right tools 2- you can buy lens clean kit and read the instructions how to use it If non of these works try to restore the system to factory settings