DJI Spark Troubleshooting

Drone is jumping around in an open area or not responding at all to foreign objects

If your drone seems to “jump”, or does not respond at all to outer interference, the sensor may be partially covered. This can commonly occur if you have previously landed the drone in muddy or wet areas. Also be sure to check the inside of the case and see if there is any other form of residue.

In order for the drone to work at its absolute best, the internal systems must be kept up to date. If you are experiencing similar issues even after trying to fly it at different locations, connect the drone to a computer by its USB and check for updates.

The GPS may simply be broken. In this case, the internal GPS will need to be replaced.

Drone is not working or the performance is minimized by the drone overheating

Check the air vents located on the top of the drone and ensure that there is nothing lodged in them or blocking them. If needed, a canister of compressed air can be used to clear the air vents.

The drone can be partially disassembled so that the external object can be removed from the fan.

If the internal fan is not turning on at all and cannot be heard operating, it is likely broken and needs to be replaced.

Drone is not capturing videos or pictures when directed to

In order for there to be enough storage for photos and videos, storage can be freed up on the device being used or an SD card can be purchased for the drone.

The drone can be taken apart to determine if the wires of the camera or gimbal have been damaged severely enough so that it cannot take pictures.

The SD card can be formatted in the Camera settings on the DJI Go app.

The arms on the controller that hold the mobile device are not holding device sturdily

While the rubber teeth of the mobile device grip is a very convenient feature, however they may be prone to wear and tear from constant use. If one or several of the teeth are withered, it can impact how the rest of your mobile device is supported.

The rubber teeth are both attached to respective hand/palm grips. Since these are foldable parts, they may become loose and will need tightening.

Over use, the controller may have come into contact with dust or dirt and therefore making the rubber parts of the mobile device grips unusable. In this case, it would be best to replace one or both of the mobile device grip arms.

Drone is not able to take flight

Check the blades for any wear or tear or breakage, a slight cut on the blade will prevent it from flying well.

Drone blades might not have been attached completely, or might have come off after a crash. check to see if all of the blades are attached onto the drone.

Check to see if something is obstructing or lodged into the motor of the blade.