Перейти к основному содержанию

Model M6497 or A1005 / 500, 600, 700, 800, or 900 MHz G3 processor

117вопросов Показать все

os x install won't recognize newly installed 160gb hard drive

I just installed a new hard drive, Western Digital 160 GB Scorpio Blue PATA 5400 RPM 8 MB Cache Bulk/OEM Notebook Hard Drive WD1600BEVE.

I used the ifixit DYI.

However, when attempting to install os 10.1, it doesn't find the hard drive. Also, the hardware utility says that the mass storage device is ok.

Any advice/solutions to this problem?

Thanks

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 1
Добавить комментарий

2 Ответов

Наиболее полезный ответ

The iBook G3 lacks something called "Large Drive Support" Meaning that drives over 128GB have to be formatted into partitions smaller than 128GB in order to be able to be used. You should be able to do this in disk utility on the disk, but you need partitions smaller then 128GB.

Был ли этот ответ полезен?

Оценка 3

1 Комментарий:

+1 Ralph

из

Добавить комментарий

just do it

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

Dk1 будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 1

За всё время: 1,283