Перейти к основному содержанию

Guides and repair information for Power Macs (previously known as Power Macintosh) including G3, G4, and G5 models.

447вопросов Показать все

Boot Chime, but no video on monitor.

After changing my PRAM battery, the powermac booted up normally showing me a question mark on the screen. Turned it off and turned it on again after a short time, however this time it started up but nothing showed up on the monitor. What could this be ?

Thanks

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка -1
Добавить комментарий

1 ответ

Выбранное решение

The first question mark showed that it could not find a operating system. Either corrupt system folder or a failed hard drive. I would check and reseat the video card. A black screen can also result from a drained battery or improperly installed battery.

Был ли этот ответ полезен?

Оценка 2

2 Комментариев:

Yes that is when i turned off the mac to get an OS to try and install it. Tried reseating the video card but no luck. Tried taking out the PRAM battery and putting it back in but no luck. Before when i had the dead battery, it wasnt doing the chime, but now it is. Could it still be the battery ?

из

Hook up another machine to the monitor and see if it has failed.

из

Добавить комментарий

Добавьте свой ответ

julianbugejacoster будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 0

За всё время: 518