Репутация: 181
5
17
1
How can i put my IDE hard drive in another IDE compatible computer to retrieve the information? I know how to install it into the tower, but i cant see whats on the hard drive. I can also see it on the Device list but dont know what to do after that? Any help??
Это хороший вопрос?
Репутация: 685,3к
3,4к
1,1к
2,6к
Using an external adapter may be the way to go. You can hook it up and plug into a USB port to access it. Here's where and what to get: http://eshop.macsales.com/item/Newer%20T...
Был ли этот ответ полезен?
+ Ralph Use one of those myself frequently.
Yep, or you could do that :]
Репутация: 389
4
1
With IDE, you have to set master or slaves. If the old drive is on the same cable as the new drive, you must set the jumpers on the back of the drive to either master for new one, slave for old one; OR set it to Cable select, in which case, you need to put the new drive on the end of the cable, old drive in the middle cable port.
Был ли этот ответ полезен?
За последние 24часов: 1
За последние 7 дней: 4
За последние 30 дней: 5
За всё время: 851
2 Комментариев
Was it formatted Mac or PC?
из mayer
Its for PC
из Tristan