Перейти к основному содержанию

iPod Classic 6th Generation. Model A1238 / 80, 120, or 160 GB hard drive / black or silver metal front

904вопросов Показать все

Why is my iPod stuck on the "HP dectect test" screen?

I was following ifixit steps to check the functionality of the hold button (diagnostic). The hold button is working fine (0 and 1). But now my screen is stuck on HP Detect : 0. It says press menu to continue, but when I press menu nothing happens. I have also tried pressing menu twice and several other combinations...

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Оценка 10
1 Комментарий

—me to. have no idea why. it reboots fine -wasn't doing this a week ago.

из

Добавить комментарий

6 Ответов

Наиболее полезный ответ

Plug in the headphones (HP).

Был ли этот ответ полезен?

Оценка 7

2 Комментариев:

...........Hmmmmmmmn? Something about hindsight, and 20x20 eyesight....?!

Thanks!

из

so i should put my HP laptop away ?

из

Добавить комментарий

need to unplug it and then push MENU

Был ли этот ответ полезен?

Оценка 1
Добавить комментарий

i plugged the earphones. it says now hp detect : 1 menu to continue. i pressed menu but it does not continue.. can you please help?

any clue please e mail me at bernard_khoury@hotmail.com

Был ли этот ответ полезен?

Оценка 0

4 Комментариев:

just take out the headphones and press the menu button then BINGO!!!

из

Now it says 'Accessories Test'

FW_DETECT = 0

USB_DETECT = 1

Please plug FW

What's this mean????

из

Firewire (FW) connection vs USB connection:

https://discussions.apple.com/thread/275...

из

Turn off hold button

из

Добавить комментарий

If it's not continuing, it didn't pass the headphone (HP) test. Ipods have a little detector that stops the ipod if a headphone isn't detected; it'll pause the song if the headphone jack is removed.

You might want to disassemble it and replace the headphone jack. If that doesn't work, it's probably a bad board.

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

after plugging it in, unplug it, then it should continue

из

Добавить комментарий

I got mine to go to the next stage by clicking the hold switch on and then off.

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

Now it's stuck on FW DETECT : 0

There's no Firewire to plug in, so I can't test this.

из

Добавить комментарий

Hello there. I have tried out a solution you your little problem here which was posted by Chi. You see, (HP) is abbreviated for Headphones, which is dumb but oh well, and it worked when my Headphones were plugged in and then unplugged.

Был ли этот ответ полезен?

Оценка 0

1 Комментарий:

didn't work for me.

из

Добавить комментарий

Добавьте свой ответ

alysont1 будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 6

За последние 7 дней: 36

За последние 30 дней: 173

За всё время: 28,537