What do I do if my pump is not properly pumping water?

Question

TotalPond Pond Pump

Part Number: DD11210 The TotalPond pump, which was designed for water gardening enthusiasts, circulates 210 gallons of water per hour, maintaining the ecological balance of small ponds. It is used in water garden less than 3 feet by 6 feet ponds and waterfalls to provide streams of water up to 7.8 feet high.

2вопросов Показать все

Вопрос закрыт

Nicole Santana @nicolesantana

Репутация: 597

11

4

1

Опубликовано: 15 фев 2015 г.

Опции

What do I do if my pump is not properly pumping water?

My pump feeds water at a height of only 2 feet.

Ответ на этот вопрос У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 0

1 Комментарий:

when I unplug the pump of a similar size it will not restart unless I thump it hard. Then it works great. Every time I clean it or the electricity goes out I have to pull it out of the water undo the filter and thump it then while running in water attempt to reassemble the filter around it.

Any suggestions? Cleaning? With what?

8 мая 2015 г. из wsaviers

Добавить комментарий

1 ответ

when I unplug the pump of a similar size it will not restart unless I thump it hard. Then it works great. Every time I clean it or the electricity goes out I have to pull it out of the water undo the filter and thump it then while running in water attempt to reassemble the filter around it.

Any suggestions? Cleaning? With what? — wsaviers

Bryan Bean @bryanbean Репутация: 111 8 1 · Answer 1 · 2015-02-15T17:52:30-07:00

Bryan Bean @bryanbean

Репутация: 111

8

1

Опубликовано: 15 фев 2015 г.

Опции

This could be due to a number of things. It is most likely due to a broken impeller, but it could also be a faulty motor or cracked pump housing. View the trouble shooting page for more information.

Был ли этот ответ полезен?

Да Нет

Оценка 0

Добавить комментарий