Опции

I need to replace my DC-in board, but...

PowerBook G4 15.2" 1.67 GHz-128 2GB 100GB SD AEX

I'm pretty sure I need to replace my DC-in board or rather DC&Sound Card, but it seems like there are two different sets of instructions for the removal/installation of the part. One looking way more complicated than the other...which do I use? Or will either one work? My sticker reads PBG4 15.2"/1.67 GHz-128/2GB/100GB/SD/AEX and my model is A1106, but both instructions say they are for the 15" PowerBook G4 with 1.67 processor...

One is here: www.ifixit.com/Guide/Repair/Installing-PowerBook-G4-Aluminum-15-Inch-1-67-GHz-DC-Sound-Card/651/1

The other is here: www.ifixit.com/Guide/Repair/Installing-PowerBook-G4-Aluminum-15-Inch-1-5-1-67-GHz-DC-Sound-Card/354/1

Which one is right? I want to know what I'm getting into before I open my baby up or maybe pay a "professional" to do it.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка -1

Добавить комментарий

Опубликовано: 2 июл 2010 г.

Опции

Go with the first one, the 651. The other is more of a complete tear down and gets into the right side and logic board which you don't need to do to replace the DC-IN port. Just take it slow and follow the steps. This is a do-able repair even for a beginner. I separate the screws into three groups when doing it. The bottom group, the external case group and the internal. Happy operating!

Oh, you might need this: [связанный продукт отсутствует или отключен: IF154-108]

Был ли этот ответ полезен?

Да Нет

Оценка 2

2 Комментариев:

+ Ralph

2 июл 2010 г. из rj713

So this part even though my model is A1106? I didn't know if the different directions are based on the models or if the 651 instructions will work for any PBG4 1.67 GHz. I think I ordered part IF154-073-1 based on my model#.

2 июл 2010 г. из Jenny

Добавить комментарий

PowerBook G4 Aluminum 15" 1.67 GHz

I need to replace my DC-in board, but...

1 ответ

Добавьте свой ответ