Will not power on, hear a slight fan sound but then nothing.

Question

iMac Intel 21.5" EMC 2389

Model A1311 / Mid 2010 / 3.06 & 3.2 GHz Core i3 or 3.6 GHz Core i5 Processor

343вопросов Показать все

Ian Hurley @ianhurley51729

Репутация: 13

1

Опубликовано: 28 апр 2015 г.

Опции

Will not power on, hear a slight fan sound but then nothing.

The machine was running, when I can back to my desk the screen was blank. I tried to power it on but nothing happened. Checked all the cords and removed all external devices. How do I test to see if it's the power supply or something else?

I replaced the power supply as instructed, but the machine still will not start. It sounds a little different when tiring to start, I hear what sounds like the HD spinning. Checked the LED test lights and still only the #1 is lit up.

Thanks

Ian

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Да Нет

Оценка 1

1 Комментарий

OK, I replaced the power supply but no difference. Maybe the hard drive sounds like its running?

30 апр 2015 г. из Ian Hurley

Добавить комментарий

1 ответ

Выбранное решение

mayer @mayer

Репутация: 685,3к

MacHale Enterprises

3,4к

1,1к

2,6к

Опубликовано: 28 апр 2015 г.

Опции

You need to take a look at the diagnostic LEDs. Take a look at this question for how to interpret them and location: Where are the diagnostic led's on this model's logic board

Был ли этот ответ полезен?

Да Нет

Оценка 2

7 Комментариев:

Try using this guide but not disconnecting the cables yet. Just lean the display forward and see if you can see the LEDs. iMac Intel 21.5" EMC 2389 Display Replacement

28 апр 2015 г. из mayer

Do I remove the display first

28 апр 2015 г. из Ian Hurley

I can not disconnect the LCD thermal sensor cable connector from its socket on the logic board.Does not want to pull off. Am I missing something?

28 апр 2015 г. из Ian Hurley

I got the display cable off. Plugged the computer in. The only LED light that comes on is the #1. It stays on but that's it. Pressing the power button results in what sounds like the hard drive trying to start up. A couple of clicks then nothing.

28 апр 2015 г. из Ian Hurley

Replace the power supply. Here's how: iMac Intel 21.5" EMC 2389 Power Supply Replacement Here's the part: iMac Intel 21.5" (Late 2009-Mid 2011) Power Supply

28 апр 2015 г. из mayer

Показать 2 больше комментариев

Добавить комментарий

OK, I replaced the power supply but no difference. Maybe the hard drive sounds like its running? — Ian Hurley
Try using this guide but not disconnecting the cables yet. Just lean the display forward and see if you can see the LEDs. iMac Intel 21.5" EMC 2389 Display Replacement — mayer
I can not disconnect the LCD thermal sensor cable connector from its socket on the logic board.Does not want to pull off. Am I missing something? — Ian Hurley
I got the display cable off. Plugged the computer in. The only LED light that comes on is the #1. It stays on but that's it. Pressing the power button results in what sounds like the hard drive trying to start up. A couple of clicks then nothing. — Ian Hurley
Replace the power supply. Here's how: iMac Intel 21.5" EMC 2389 Power Supply Replacement Here's the part: iMac Intel 21.5" (Late 2009-Mid 2011) Power Supply — mayer

iMac Intel 21.5" EMC 2389

Will not power on, hear a slight fan sound but then nothing.

1 ответ

Добавьте свой ответ