Перейти к основному содержанию

Repair information for the 4th generation iPad. Released November 2, 2012. Model numbers: A1458, A1459, and A1460.

408вопросов Показать все

Static and lines on screen after repair.

hello, i'm a IT tech and im doing a repair for my grandmother. this is my first ipad repair. although it went very well after ordering some parts, the original screen i started with which was fine; only the glass was broken in several places. now that same screen displays static and lines. i have checked the ribbon cable several times over and all connections and i cannot seem to find the problem on why its suddenly doing this just as im about to finish it up. any help would be appreciated. thnx.

Отвечено! Посмотреть ответ У меня та же проблема

Это хороший вопрос?

Оценка 1
Добавить комментарий

2 Ответов

Выбранное решение

iPad 4 LCD cable cannot be removed independently.

However cleaning connector with 90%+ IPA then trying to reseat is a good start.

Otherwise either LCD is damaged, cable has been pinched/torn, or screen connector on the board or its plastic tab are damaged.

If reseating doesn't help, try a new known good screen. If this still doesn't solve it (or even before testing with a new LCD) examine the cable using a magnifying glass, and go over the connector on the board. Do you see anything wrong?

Был ли этот ответ полезен?

Оценка 1

1 Комментарий:

the lines are still vertical and made of static after cleaning and reseating. things must be looking pretty grim for me right now.

из

Добавить комментарий

I have never heard of this before. I think you did not properly replace the LCD digitizer.

Был ли этот ответ полезен?

Оценка 0
Добавить комментарий

Добавьте свой ответ

ryan norgren будет вечно благодарен.
Просмотр статистики:

За последние 24часов: 0

За последние 7 дней: 0

За последние 30 дней: 8

За всё время: 925